A wall that doesn’t support the frame stand up and only holds up is defined as a non-load-bearing wall. This wall is also called the “curtain wall”.On the other hand, non-load-bearing walls are inside the house and do not support any of the building’s structural weight. They carry no extra weight of the structure of the house other than their own.
These walls are mainly used as room dividers, and mostly do not serve any other purpose. By simply looking at the beams in your attic or basement, you can quickly identify those walls. If the joists and rafters run parallel to the wall, they are often considered to be walls with no load-bearing. You can remove these walls without endangering the building’s safety, as they are not responsible for your property’s gravitational support.
Types of Non-Load Bearing Walls
- Hollow Bricks Wall
- Hollow Concrete Block Wall
- Facade Bricks Wall
- Brick Walls
Hollow Bricks: We are enjoying natural life. These will reduce the use of heating and refrigeration equipment. They are well-used and reliable. Hollow bricks are productive on the bill. These hollow clay blocks are an advancement in the building field.
The weight of this particular hollow block is 60 percent lower than that of the same size cement block. You can save Rs 5 / Sq by using this hollow block. In structural costs, ft in your building. Read More
Hollow Concrete Block: The concrete building walls are rendered empty. It has a great power advantage. It gives stability, without any material waste. Concrete blocks consist of Portland cement and aggregate, sand and gravel can be used in the high-density blocks, whereas low-density blocks use industrial waste instead of aggregate.
Lightweight blocks are constructed from aerated concrete. Hollow concrete blocks are created, cured, and healed until they reach the site and are a very durable and strong material.
Facade Bricks: It is strong, robust, and almost maintenance-free. In this brick, shades don’t sacrifice their radiance. The bricks on the exterior are environmentally sound and reusable.
Brick Walls: It is a block or wall made of brick which is immovable. Brick walls are easy to mount.
Applications of Non-Load Bearing Walls
- A non-load-bearing wall doesn’t fit overloads on the ground-roof.
- The structural framing method is not an integral part of this.
- One can remove any walls bearing no-load without losing the safety of the house.
- The joists and the rafters will classify walls that are non-load bearing.
- They are not responsible for aiding the gravity of the land.
- Most of the time, these are internal walls designed to separate the floor into spaces.
- They are made lighter for taking down the dead load of the structure.