Table of Contents
Lightweight Pest Resistance AAC Blocks
In the prefabricate of LIght weight AAC Blocks, the top humus is raw materials are of wind, resulting in ecological imbalances. But by exploit fly ash which is the waste material generated by thermal power stations, we will be saving the raw material on one hand and putting the industrial waste into beneficial use. This makes aac blocks for construction as one of the best examples of a truly environment-friendly product. The shore is another substitute to fly ash for prefabricating AAC blocks. However, sand cannot be reusable like fly ash and therefore assemble AAC Blocks using sand cannot scrutinize a green process and the resultant product an environment–friendly product.
Using sand will only crumble the natural river bed, thereby growing its course and result in ecological imbalances. As every constitutional engineer knows, that appropriate care needs to be given to masonry wall members, because it gives full shape and composition to the building. I have realized that everyone disregard the wall member in the structure will mean that the importance of the masonry wall will have been neglected by all parties concerned – structural confidant, constructor, advocate, hauler, etc. This will mean not following the specifications laid down in which will lead to problems like, fleece crack, parallel crack and bargain crack, etc. in the wall at a later date. I, therefore, appeal to all contractors, constructors, builders to follow certain dominant guidelines given below before and during the establishment of the AAC masonry wall for better winning. We can get support from ACC block manufacturers.
Quality aerated concrete blocks
ACC blocks making units also known as air-light pot inflate concrete. It is aac concrete blocks are made by mixing Portland aac cement blocks, lime, fly ash, water, and alum powder the final mixture is cascade into molds. The reaction between aluminum and lime causes infinitesimal hydrogen bubbles to form lower density concrete by expanding it. After the evaporation of the hydrogen and the initial setting, the oxygenate concrete is cut into the required sizes and cured by steam-curing in a coerce chamber or low pressurized steam chamber. The result is a harmless, high strength, lightweight, impermeable material that can be used for all walling solicitation.
instead, one might notice the presence of much larger Grey blocks present at the site. This is to be credited to the slow but sure shift in the real estate industry which is being brought about with the use of AAC Blocks or aac cement blocks which is a superior substitute to traditionally used bricks.
AAC blocks are famously being used as a superior substitute in the place of bricks. Living in a home, made of this Premium quality branded aac blocks technology in the construction material brings many advantages to the buyer. Some of the important points of differentiation include.
AAC blocks can be used not just for homes & residential complexes as a green building construction but also for hotels, hospitals, shopping malls, educational institutes and so on. The world’s biggest brand Aparna Group has used the best quality autoclaved aerated concrete blocks in most of the construction building material. In India, it’s just the beginning of the ‘Grey Revolution.’ You can go test it yourself.
AAc cement manufacturers use basic raw material used for the manufacturing of AAC Blocks are Fly Ash, Gypsum, Lime, and OPC. This required quantity of raw material initially fed as a whole into the pouring mixture alongside aluminum powder that’s added as a separate component. Later on, these undergo further processing Block casting on mold and then lead to demolding and wire cutting. The wire-cut blocks are then placed under high-pressure Steam Curing for nearly 12 hours and the result – Lightweight aerated concrete blocks
The AAC blocks are a premium quality that they can showcase your interior and exterior design construction beautifully. Ever since the arrival of AAC Blocks in the Indian Market, there’s a greater buzz for these products owing to its reliability and durable properties. Both Builders and Customers have started to have a sneak peek on the Commerical acc blocks and its advantages. A lot of industrial studies and researches are been continually set up to have a briefer and better insight on the implementation of AAC blocks and its associated products.
But then, the factual proofs and dimensional studies have largely provided a greater stand on the implementation of AAC blocks. Moreover, it is evident from the reports that the Autoclaved Aerated Concrete is the Next Big Thing in the Construction Sphere. The one important consideration is AAC brick price compared to traditional bricks AAC Blocks possess less price.
So, having said that don’t you think this is the right time to explore? Or rather perceive how the Autoclaved Aerated Concrete blocks can truly change the dimensions of your dream home?
Based on the above technical benefits, the AAC blocks are considerably known for its Economical advantages as well. Owing to these tremendous benefits that the AAC blocks uphold, their ingress into the Indian market didn’t take much time. The popularity of aac bricks manufacturers then never took a halt, people started to invest more time in knowing the AAC blocks better.
This shift in transition amidst the people and industry led to the flourished acceptance of the green building material across India. Moreover, the studies as in March 2018 revealed that were 70 AAC blocks manufacturing units in India and worldwide that was a massive count that the construction industry never dream. Such was the degree of magnification in the domestic arena.
Make Your Home Pest Free with Pest Resistant AAC Blocks
Being a non-organic based material it is resistant to termites, rodents, ants, and insects, thus offering maximum protection from pests and lowering the maintenance cost in the long run. Pests can affect our walls mostly in the bathrooms windows corners of your home infect its interior as well as the exterior appearance. Change in weather is one of the reasons for infection of pests and these pests could keep on increasing over the same area of walls. To avoid pests keep your walls safe, you should use in build construction of your walls with efficient and durable AAC blocks
AAC Blocks consists of the inorganic material which resistant to termites, rodents, ants, and insects, thus offering maximum protection from pests. A unique replacement of the conventional red bricks in construction with AAC blocks manufacturers(Autoclaved Aerated Concrete) blocks. The AAC Blocks are lightweight, stone, cost and environmentally effective. AAC blocks easy to install and compared to heavy clay bricks as they require relatively lower efforts and cost in transportation. AAC blocks are versatile with properties of earthquake resistance, thermal conductivity and ease of use because of their unique benefits in the construction industry. Most of the countries in the world widely using AAC blocks in the construction of their project and have recently started making its mark in India.
AAC Blocks are environmentally Eco-friendly and do not pollute the environment, water or land. This ensures that there is no generation of waste during the AAC blocks manufacturers in the AAC blocks production unit. Another important consideration of the AAC Blocks is moisture protection. The AAC blocks consist of a porous structure, which are small air bubbles distributed evenly throughout the walls. This ensures that there is minimal absorption of water into the AAC blocks and gives complete protection internally as well as externally.
Make your home with fire and pest resistant ACC blocks are makes resistant to pests and insects. This a main source that helps in building maintenance with a minimum cost because AAC blocks made with inorganic material. This, in turn, reduces damage to constructions. They prevent the termites from entering the buildings. Thus, offering protection and saving huge loss to the construction builders. Indeed, Only pest-resistant AAC blocks are the best quality and most recommended product for complete protection against pests for your dream home.
Advantages of Using AAC Blocks In Construction Industry
Autoclaved Aerated Concrete (AAC Blocks) Blocks are eco-friendly construction material, which can be used as both commercial and residential building construction. The net density of the AAC block is about one third that of a conventional brick, therefore, by using the AAC block, we can reduce the dead load on the construction of a structure by which to some extent we can save the cost of construction time. Therefore the management of cost-effectiveness can be achieved by using AAC block for the construction of a wall in different types of buildings.
AAC blocks manufacturers from common and abundant natural raw materials, therefore it is extremely resource-efficient and eco-friendly. The energy consumed in the production process emits no pollutants and creates no by-products or toxic waste products. The aspects of AAC blocks related to the lightweight construction methods, its properties, production methods, the cost-effectiveness of using AAC block, its salient features and the advantages of using AAC blocks are carried out.
Thermal Insulation
Highest thermal rating in the industry R30! Thus provides well-insulated material interiors, keeping out warm air in summers and cold air in winters depend on the environmental condition. Concrete bricks reduce the use of air conditioning costs by 20% result in a reduction in electricity bills. Best quality aac block provides primer thermal insulation due to its very closely grouped cellular structure and results in substantial power savings where air-conditioned needs are necessary.
Environmentally Sound
AAC blocks manufacturer with abundant makes use of Fly ash as AAC Blocks manufacturing (which makes it a green product in the construction industry), unlike conventional clay bricks which use the fertile topsoil which was otherwise used for Agriculture for manufacturing of aac blocks. AAC Blocks manufacturing involves no production of waste products and no pollution to the environment it is a green building product. Its manufacturing requires a small amount of energy as compared to other building materials for walling. It is a new technology in the present trend.
Go-Green Nature
In India itself, AAC blocks construction has the potential to reduce 200mn tonnes of CO2 emissions into the environment-saving of every year. A Green Building material that acc blocks contributes to LEED rating as the best quality autoclaved aerated concrete blocks
Earthquake Resistant
Earthquake forces on structure are always directly proportional to the weight of the building, hence AAC Blocks which shows excellent earthquake resistant. Seismic activity regions, such as the exclusive use of AAC bricks for building construction. Another added advantage is it has been proven the sustainable product to withstand wind loads of category 4 tropical storms regions.
Energy Efficient
AAC Blocks providers generate 100% green building fabric for construction and is a walling fabric of selection in LEED-certified structures (ITC center the largest ranked greenhouse has been constructed using AAC) major aac block companies are mostly capable of producing extremely energy-sustainable and resource-efficient houses in the context that they use a tiny quantity of fuel & mater.
Unlike blocks manufacturing unit which use precious layer too-layer agricultural soil, AAC Blocks uses fly ash as a raw material composition of 70% of its weight, thus provides the most highly constructive green building solution choice to engineers architects the nation’s fly-ash utilization problem.
Fire Resistant
Its distinctive aac block cell structure offers outstanding fire resistance and safety. Only because of its AAC Cellular Structure layers does not alter its incorporation into the flames. It’s ideal in the Fire-resistant category for up to 4 hours. The temperature bearing point of AAC blocks is over 1650 degrees Celsius, more than 2 times the actual temperature of the building fire 650 degrees Celsius.
Pest Resistant
With the solid type of wall construction and finishes, there are fewer if any, cavities for insects and rodents to dwell into the walls. Termites and ants do not eat or nest in AAC Blocks. Being manufactured up of inorganic minerals, it does not promote the growth of molds at any condition.
AAC Blocks Installation Process Complete Guide
The popularity of AAC Blocks in India has grown for the last 10 years. In India AAC Blocks has a long history of development, having been in use for more than 20 years. AAC Blocks is concrete that has been manufactured it contain lots of closed air particles. The main advantage of AAC Blocks is that it is lightweight and relatively energy-efficient, it is produced by introducing a foaming agent to the concrete in the mold, then wire-cutting bricks or boards of the subsequent cake slicing produced simply by steaming.
It consists of moderate embodied energy content and executes well as thermal and sound protection, due to the aerated structure of the material and its unique combination of thermal insulation and thermal mass as compared to conventional bricks. It is light in weight, does not burn, is an excellent fire-resistant material, and it can support heavy loads in any climatic condition. It is relatively very easy to use it as building construction material and can be cut and shaped even with hand tools including woodworking tools.
Make sure you have the best and right block in your hand for your construction and consider acquiring some standard buildings and for architectural designs, AAC blocks are a better choice because you can mold block into half-blocks with square or rounded corners to facilitate the installation process.
Stake the Wall
Wall construction Starts with marking outside of the concrete block wall margin. Set the stakes with a rubber a mallet and use a twine line that will help you determine if the lines are straight.
Prepare a Foundation
Prepare a foundation for the wall. Generally, the base for concrete or masonry block walls are made out of concrete and should be at least four inches wider than the width of the block. ACC Bricks Manufacturers know how much width of the wall should be so builders made easy use of aac blocks in construction which allow the concrete foundation to acquire strength. Before building a blocks wall on existing concrete slab compulsory slab is in moist condition and a one-inch bed of mortar has been spread over the footing.
Learn How to Lay Blocks
Light Weight Blocks made easy to lay fast. Start mixing concrete on the mortar mix as instructed. The first course of instruction AAC blocks should be installed below floor level and inside the base trench. This first line of concrete bricks shall rest on the top layer of the mortar mix for the strong baseline. Spread mortar along the sides of the block and remove the unnecessary mortar with a trowel.
Repeat the process until the first course has been installed. Check the wall course with a level before starting the second course. Then, even it out with a thicker layer of mortar, if it is not. For best result make sure there is a 3/7 inch distance between one block to another block. This gap will then become the vertical joint laying process continue until how much height you want.
Installing the Second Course
Repeat the same process what did in the first-course action performed add another course of blocks. Concrete Bricks can be set in such a way process continues interlocking pattern formed in between the layer by layer meaning that the ends of one course of blocks sit above the center of the blocks beneath them.
Continue this process of building interlocking blocks and try to install no more than six courses per day. Allow the wall to get strong leave the wall for 3 days to get strong and blocks interlock well mortar to set completely before continuing to lay concrete blocks. Once the mortar gets hard, remove excess amount and smooth the joints. Light Weight Bricks bears the load of the total wall easily because it is light in weight.
How to Cut Concrete Blocks
If you want to construct the wall with a good finishing make sure cut blocks with required dimensions. Wall corners need to be cut to get good finishing so they can be installed in corners and along joints. The easy way to cut a concrete block in the required dimensions is to use a hammer and chisel draw a line on the block using a hammer to cut it. This line should be created after you have measured the void on which the block will be installed.
Using the hammer chip away the block along the line. Be careful not to apply large force on the line were created while hammering otherwise the block could be broken into smaller pieces. Repeat the process hammering until the block breaks into the required dimension.
Structural Masonry Walls
When the AAC block wall needs to be reinforced then, that is considered a structural masonry wall. Vertical reinforcement can be installed within the block cells and filled with mortar. Horizontal reinforcement might be needed as well, using prefabricated welded wires that are placed along the horizontal joints of in between courses. The horizontal reinforcement will also prevent or control shrinkage cracking.
When the wall is designed as an exterior wall then another wythe of masonry is recommended. If single wythe exterior walls are to be installed, a barrier should be provided on the exterior surface, such as a fluid-applied, breathable masonry coating or over-cladding EIFS, metal panels, stucco and similar to prevent water penetration into the masonry. It could be possible that a second wythe is to be installed to support loads.